An Innovative Lift Control Board Design and Prototype Production Using CANbus Communication System and STM32 Microcontroller

Main Article Content

İpek Sözer
Recep Can Başkurt
İsmail Ovalı
Engin Tan

Abstract

In this study, Önder Group Inc. Design Center, with an innovative approach, designed controllers for the first time, and prototypes were produced for a wide range of goods lifts according to different needs. With the innovative board design, goods lift users can choose parameters such as the number of floors, door types, and lock types from a user-friendly menu to suit their needs. Within the scope of the study, all functions that may be needed were identified, and the hardware structure of the system was determined. By simply changing the defined parameters, the desired goods lift controller can be made ready in a very short time. Time savings were achieved by simply expanding the hardware structure with the design of the CANbus communication system according to the number of floors and stops of the elevators. Thus, a wide range of lifts can be used by simply increasing the number of floor announcer boards and selecting the menu. Additionally, thanks to the designed Wi-Fi plug-in software, operators will be able to monitor the malfunction and operating status of the lift. With this plug-in, technical service teams can intervene immediately in case of malfunction.

Downloads

Download data is not yet available.

Article Details

How to Cite
Sözer, İpek, Başkurt, R. C., Ovalı, İsmail, & Tan, E. (2024). An Innovative Lift Control Board Design and Prototype Production Using CANbus Communication System and STM32 Microcontroller. The European Journal of Research and Development, 4(1), 18–31. https://doi.org/10.56038/ejrnd.v4i1.361
Section
Articles

References

Kaymakçı, Ö. T. & Karbayır, F. (2023). A fail safe electronic card design for lifts. Kırklareli University Journal of Engineering and Science, 9(1), 130-154. DOI: https://doi.org/10.34186/klujes.1250928

Bayındır R. & Çetinceviz Y. (2011). A water pumping control system with a programmable logic controller (PLC) And industrial wireless modules for industrial plants—An experimental setup, ISA Transactions, 50(2), 321-328. DOI: https://doi.org/10.1016/j.isatra.2010.10.006

Alphonsus E. A. & Abdullah M. O. (2016). A review on the applications of programmable logic controllers (PLCs). Renewable and Sustainable Energy Reviews, 60, 1185-1205. DOI: https://doi.org/10.1016/j.rser.2016.01.025

Mellado, J. & Núñez, F. (2021). Design of an IoT-PLC: A containerized programmable logical controller for the industry 4.0. Journal of Industrial Information Integration, 25, 100250. DOI: https://doi.org/10.1016/j.jii.2021.100250

Stankovski, S., Ostojić, G., Baranovski, I.., Tegeltija, S. & Smirnov, V. (2022). Robust automation with PLC/PAC and edge controllers. IFAC-PapersOnLine, 55(4), 316-321. DOI: https://doi.org/10.1016/j.ifacol.2022.06.052

Ege, K. G., Kesen, U., Yüce, H. & Genç, G. (2021). Design and simulation of FR4 and FR2 printed circuit boards in microstrip antenna application. Journal of Materials and Mechatronics: A, 2(1), 51-59.

Atintoh, A., Kpobie, W., Bonfoh, N. ,Fendler, M., Addiego, F. & Lipinski, P. (2023). Multiscale characterization of the mechanical behavior of a printed circuit board (PCB). Materials Today Communications, 34, 104968. DOI: https://doi.org/10.1016/j.mtcomm.2022.104968

Flores, G., Aracil, C., Perdigones, F. & Quero, J. M. (2018). Lab-protocol-on-PCB: Prototype of a laboratory protocol on printed circuit board using MEMS technologies. Microelectronic Engineering, 200, 26-31. DOI: https://doi.org/10.1016/j.mee.2018.08.003

Liu, J., Wan, J. & Yan., Y. (2011). Study on CANbus control system-oriented simulation platform based on the node task. Procedia Engineering, 15, 3984-3988. DOI: https://doi.org/10.1016/j.proeng.2011.08.746

Craessaerts, G., Maertens, K. & De Baerdemaeker, J. (2005). A Windows-based design environment for combine automation via CANbus. Computers and Electronics in Agriculture, 49(2), 233-245. DOI: https://doi.org/10.1016/j.compag.2005.04.007

Ismail, K., Muharam, A. & Pratama, M. (2015). Design of CAN bus for research applications purpose hybrid electric vehicle using ARM microcontroller. Energy Procedia, 68, 288-296. DOI: https://doi.org/10.1016/j.egypro.2015.03.258

https://www.emo.org.tr/ekler/819ff6640a71a60_ek.pdf?tipi=2&turu=X&sube=14

https://www.kmpdrivetrain.com/paddleshift/practical-tips-can-bus/

Saravanan, G., Chandraprabha, S., Dinesh, C. & Ibrahim, A. M. (2021). IoT materials enabled indoor light illumination monitoring system. Materials Today: Proceedings, 45(7), 6277-6281. DOI: https://doi.org/10.1016/j.matpr.2020.10.705

Dheeven, T. A., Kumar, P. M., Venkatesh, V. & Sailaja, K. A. I. (2024). IoT based sensor enabled vehicle parking system. Measurement: Sensors, 31, 100953. DOI: https://doi.org/10.1016/j.measen.2023.100953

Munirathinam, P. & Chandrasekhar, A. (2023). Wearable triboelectric nanogenerator for real-time IoT-supported security applications. Sustainable Materials and Technologies, 37, e00700. DOI: https://doi.org/10.1016/j.susmat.2023.e00700

Raju, M. P. & Laxmi, A. J. (2020). IOT based online load forecasting using machine learning algorithms. Procedia Computer Science, 171, 551-560. DOI: https://doi.org/10.1016/j.procs.2020.04.059

Zang, H.F. & Kang, W. (2013). Design of the Data Acquisition System Based on STM32. Procedia Computer Science, 17, 222-228. DOI: https://doi.org/10.1016/j.procs.2013.05.030

Chaber, P. & Ławryńczuk, M. (2019). Fast analytical model predictive controllers and their implementation for STM32 ARM microcontroller. IEEE Transactions on Industrial Informatics, 15(8), 4580-4590. DOI: https://doi.org/10.1109/TII.2019.2893122

Bühler, H., Walz, A. & Sikora, A. (2022). Benchmarking of symmetric cryptographic algorithms on a deeply embedded system. IFAC-PapersOnLine, 55(4), 266-271. DOI: https://doi.org/10.1016/j.ifacol.2022.06.044

Boscaro, A., Jacquir, S., Sanchez, K., Perdu, P. & Binczak, S. (2015). Improvement of signal to noise ratio in electro optical probing technique by wavelets filtering. Microelectronics Reliability, 55(9-10), 1585-1591. DOI: https://doi.org/10.1016/j.microrel.2015.06.100

https://www.murata.com/en-us/products/emc/emifil/library/knowhow/basic/chapter01-p1

https://www.kemet.com/en/us/technical-resources/the-importance-of-filtering-for-power-supplies.html