Design and Prototype Production of Scissor Lift Platform 25 Tons Capacity

Main Article Content

İzzet Solmazyiğit
Recep Can Başkurt
İsmail Ovalı
Engin Tan

Abstract

In this study, an innovative 25-ton-capacity scissor lift was designed for the first time, and a prototype was produced in Onder Group Inc. Within the scope of the study, a rolling bearing system was designed instead of the conventional welded scissor-hinge connection system. Static and strength calculations were made using finite element analysis for comparison purposes. As a result of the analysis, it was determined that the stress distribution on the roller bearing system was more homogeneous and at lower values (≈60 MPa) than the welded hinge system. In addition, a detachable (bolted) joint was obtained instead of a fixed (welded) joint with the designed rolling bearing system. With the design analyses carried out within the scope of the study, a particular joint-clamp system was made to expand the surface areas of the welded joints.

Downloads

Download data is not yet available.

Article Details

How to Cite
Solmazyiğit, İzzet, Başkurt, R. C., Ovalı, İsmail, & Tan, E. . (2022). Design and Prototype Production of Scissor Lift Platform 25 Tons Capacity. The European Journal of Research and Development, 2(4), 326–337. https://doi.org/10.56038/ejrnd.v2i4.177
Section
Articles

References

Zhang, W., Zhang, C., Zhao J., & Du, C. (2015). A study on the static stability of scissor lift. The Open Mechanical Engineering Journal, 9, 954-960. DOI: https://doi.org/10.2174/1874155X0150901954

Sirotenko, A. N., Partko, S. A., & Borovkov, A. S. (2021). Mathematical modeling of power loads in the construction of a parallelogram lift. Journal of Physics: Conference Series, 1889, 1-6. DOI: https://doi.org/10.1088/1742-6596/1889/4/042030

Choe, H.U., Kwon, Y. R., Jo, J. G., Ri, K. S., Jang, H. U., & Xing, T. (2022). A method to improve the stability of scissor lifting platform by using finite element analysis. International Journal of Scientific Research in Science, Engineering and Technology. 9(2), 314-322. DOI: https://doi.org/10.32628/IJSRSET229253

Jack, K. E., Essien, U. A., Bamisaye, O. S., Paul, K. O., Ozoemela, E. E., & Okpo, C. N. (2021). Enhancement of mobile scissor lifting system for windy environments. Nigerian Journal of Technology, 40(2), 229-240. DOI: https://doi.org/10.4314/njt.v40i2.8

Rashid, H., Ariffin, M. K. A. M., Noh, M. H. M., Abdullah, A. H., Hamid, A. H. A., Jusoh, M. A. M., & Othman, A. (2012). Design review of scissors lifts structure for commercial aircraft ground support equipment using finite element analysis. Procedia Engineering, 41, 1696-1701. DOI: https://doi.org/10.1016/j.proeng.2012.07.370

He, S., Ouyang, M., Gong, J., & Liu, G. (2019). Mechanical simulation and installation position optimisation of a lifting cylinder of a scissors aerial work platform. The Journal of Engineering, 2019(13), 74-78. DOI: https://doi.org/10.1049/joe.2018.8961

Hongyu, T., & Ziyi Z. (2011). Design and simulation based on Pro/E for a hydraulic lift platform in scissors type. Procedia Engineering 16, 772-781. DOI: https://doi.org/10.1016/j.proeng.2011.08.1153

Throat, S. G., Chiddarwar, A. R., & Prusty, S. P. (2017). Design and construction of hydraulic scissor lift. International Journal of Current Engineering and Technology, Special Issue 7, 92-95.

TS EN 10025-2 (2019). Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels.

TS EN 10025-2 (2019). Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels.

Bankoti, S., Jain, N., & Misra, A. (2015). Topological optimization of 3d structures by optimality criteria using Ansys. International Journal for Research in Emerging Science and Technology, 2(2), 30-35.

Zhang, W., Zhang, X., Yan, C., Xiang, S., & Wang L. (2015). A characteristic triangle method on input vectors of scissor lift mechanism and its applications in modeling and analysis. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 9(3), 1-20. DOI: https://doi.org/10.1299/jamdsm.2015jamdsm0042

Rašović, N., Vučina, A., & Obad, M. (2019). Stress analysis of lifting table using finite element method. IOP Conf. Series: Materials Science and Engineering, 659, 1-6. DOI: https://doi.org/10.1088/1757-899X/659/1/012012

Dengiz, C. G., Şenel, M. C., Yıldızlı, K., & Koç, E. (2018). Design and analysis of scissor lifting system by using finite elements method. Universal Journal of Materials Science 6(2), 58-63. DOI: https://doi.org/10.13189/ujms.2018.060202

Čuchor, M., Kučera, L., & Dzimko, M. (2021). Engineering design of lifting device weighing up to 3.5 tons. Transportation Research Procedia, 55, 621-628. DOI: https://doi.org/10.1016/j.trpro.2021.07.095

Rani, D., & Agarwal, N. (2015). Design and fabrication of hydraulic scissor lift. MIT International Journal of Mechanical Engineering, 5(2), 81-87.

Abo-Shanab, R. F., & Sepehri, N. (2005). Tip-over stability of manipulator-like mobile hydraulic machines. Journal of Dynamic Systems Measurement and Control, 127(2), 295-301. DOI: https://doi.org/10.1115/1.1898239

Ciupan, C., Ciupan, E., & Pop, E. (2019). Algorithm for designing a hydraulic scissor lifting platform. MATEC Web of Conferences, 299, 1-10. DOI: https://doi.org/10.1051/matecconf/201929903012

Dong, R. G., Pan, C. S., Hartsell, J. J., Welcome D. E., Lutz, T., Brumfield, A., Harris, J. R., Wu, J. Z., Wimer, B., Mucino, V., & Means, K. (2012). An investigation on the dynamic stability of scissor lift. Open Journal of Safety Science and Technology, 2, 8-15. DOI: https://doi.org/10.4236/ojsst.2012.21002

Bao Z. (2019). Study on simulation of system dynamic characteristics of hydraulic scissor lift based on load-sensing control technology. IOP Conference Series Materials Science and Engineering, 612(4), 1-10. DOI: https://doi.org/10.1088/1757-899X/612/4/042036

Stawiński, L., Kosucki, A., Morawiec, A., & Sikora, M. (2019). A new approach for control the velocity of the hydrostatic system for scissor lift with fixed displacement pump. Archives of Civil and Mechanical Engineering, 19(4), 1104-1115. DOI: https://doi.org/10.1016/j.acme.2019.06.001