Block Sponge Compression and Packaging System Design and Analysis with Finite Element Method
Article Sidebar
Main Article Content
Abstract
In today's sponge industry, sponges are large and take up space, so there is an excessive amount of shipments for delivery. For this reason, there is a need for a system that can pack the sponge in order to reduce the height of the sponge and to ensure the shipment of more products at once, in order to compress the sponge and prevent it from returning to its original state. In this study, the design and analysis of the sponge compression and packaging system, which will reduce the height of the sponge by 10 times, has been made. Soldiworks program was used to model this system. The structural analysis of the system was examined with the help of the widely used Ansys Workbench 18.1 program, that is, the stress, deflection and safety coefficient values of the system elements were obtained. As a result of the analysis, it was concluded that the designed system can be used safely in the compression and packaging operations of sponges up to 28 density.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
References
(ACC), A.C.C., The 2018 End Use Market Survey for the Polyurethanes Industry in the United States, Canada and Mexico. 2018.
Inc, T.A.W.M.A., Pan Pacific Clinical Practice Guideline for the Prevention and Management of Pressure Injury. 2012, Osborne Park, WA: : Cambridge Media.
Lal, J.A.R., J., Polyurethane furniture, toxic gases. 1992.
Walter, T.R., A.W. Richards, and G. Subhash, A Unified Phenomenological Model for Tensile and Compressive Response of Polymeric Foams. Journal of Engineering Materials and Technology, 2009. 131(1). DOI: https://doi.org/10.1115/1.3026556
Maxwell, J., Plastics in the Automotive Industry, . 1994, Cambridge, U.K.: Woodhead Publishing Ltd. DOI: https://doi.org/10.1533/9781845698645
Demirel, S. and B. Ergun Tuna, Evaluation of the cyclic fatigue performance of polyurethane foam in different density and category. Polymer Testing, 2019. 76: p. 146-153. DOI: https://doi.org/10.1016/j.polymertesting.2019.03.019
Li, A., et al., Flame-retardant and mechanical properties of rigid polyurethane foam/MRP/mg(OH 2/GF/HGB composites. Journal of Applied Polymer Science, 2018. 135(31): p. 46551. DOI: https://doi.org/10.1002/app.46551
Marsavina, L., et al., Failure of Polyurethane Foams under Different Loading Conditions. Key Engineering Materials, 2008. 385-387: p. 205-208. DOI: https://doi.org/10.4028/www.scientific.net/KEM.385-387.205
Samet Demirel , B.E.T., Constant-Fatigue Performance of Different Polyurethane Foams for Sitting Purposes. Kastamonu Univ., Journal of Forestry Faculty, 2019. 19(2): p. 225-234. DOI: https://doi.org/10.17475/kastorman.626277
Gama, N.V., A. Ferreira, and A. Barros-Timmons, Polyurethane Foams: Past, Present, and Future. Materials (Basel), 2018. 11(10). DOI: https://doi.org/10.3390/ma11101841
H.Ulrich, Urethane Polymers. Kirk- Othmer Encyclopedia of Chemical Technology. 1983, New York.: J. Wiley.
Yang, C. and S. Kyriakides, Multiaxial crushing of open-cell foams. International Journal of Solids and Structures, 2019. 159: p. 239-256. DOI: https://doi.org/10.1016/j.ijsolstr.2018.10.005
Esim E. , B.E., Structural Analysis of Industrial Foam Crusher Machine By Using Finite Element Method. Avrupa Bilim ve Teknoloji Dergisi, 2021. 29: p. 343-350. DOI: https://doi.org/10.31590/ejosat.1012035
Elmas, F.M.M., Turhan , O.N., Dilmeç, M. , H Tipi Hidrolik Pres Gövdesinin Yapısal Analizi ve Optimizasyonu. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 2019. 7: p. 34-45. DOI: https://doi.org/10.29130/dubited.421883
Yıldırım , Ş., Esim E.,, Modal Analysis of Double Beam Overhead Type Crane Systems by Finite Element Method. Konya Journal of Engineering Sciences, 2019. 7: p. 975-988. DOI: https://doi.org/10.36306/konjes.627067
Esim E. , B.E., Endüstriyel sünger ezme makinasının güç ünitesi tasarımı ve sonlu elemanlar metodu ile titreşim analizi. . Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi. , 2022. 11(4): p. 1154-1162.
Sezer, T., Kilic, K., & Esim, E., , Effect of Implant Diameter and Bruxism on Biomechanical Performance in Maxillary All-on-4 Treatment: A 3D Finite Element Analysis. The International journal of oral & maxillofacial implants, 2022. 37(4): p. 709-721. DOI: https://doi.org/10.11607/jomi.9419
Aslan, T., et al., Evaluation of Stress Distributions in Mandibular Molar Teeth with Different Iatrogenic Root Perforations Repaired with Biodentine or Mineral Trioxide Aggregate: A Finite Element Analysis Study. J Endod, 2021. 47(4): p. 631-640. DOI: https://doi.org/10.1016/j.joen.2020.11.018
Liu, W. Research on Technical Transformation and Innovative Design of Polyurethane Sponge Cutting Machine. in 2021 IEEE International Conference on Artificial Intelligence and Industrial Design (AIID). 2021. DOI: https://doi.org/10.1109/AIID51893.2021.9456525