Development Of Innovative Waterless Patterned Wool Fabric Designs Obtained Via Laser Technology

Rıza Atav

Tekirdağ Namık Kemal University

https://orcid.org/0000-0002-5807-4542

Durul Büşra Dilden Debreli

Beymen Perakende ve Tekstil Yatırımları A.Ş.

https://orcid.org/0000-0002-4636-7698

DOI: https://doi.org/10.56038/oprd.v5i1.494

Keywords: Laser, wool, dye, sustainable, green consensus, waterless patterning


Abstract

The main goal of this study is to present a more environmentally friendly and sustainable approach in fabric patterning and thus to ensure the protection of natural resources for the green consensus that is important today and to minimize the damage we give to the environment. When the literature is examined, it is seen that studies on the applications of laser technology, which offers the opportunity of waterless patterning, have intensified especially after the 2000s in the textile field, but there are still few studies. Although there are small laboratory-scale studies, no study has been found on the adaptation of these results to production conditions. Therefore, it can be said that the contribution of the study to the literature is important and original. In this study, first of all, the effect of laser treatment on the dye uptake ability and fastness values of wool fabrics was investigated. For this purpose, laser treatments were applied to the fabrics at different resolutions (17 and 20 dpi) and pixel times (60 and 70 µs) before dyeing. In the second part of the study, the possibilities of waterless laser patterning were investigated on fabrics subjected to laser treatment at different doses regionally. As a result of the studies, an alternative method to printing processes was developed for obtaining patterns on wool fabrics without using water and chemicals. Thus, a more environmentally friendly and sustainable approach was presented in fabric patterning.


References

Atav, R. (2013). The use of new technologies in dyeing of proteinous fibers, In: Eco-Friendly textile dyeing and finishing (Ed Günay, M.), 103-147, INTECH Publishing, Crotia. DOI: https://doi.org/10.5772/53912

Montazer, M., Taheri, S.J., Harifi, T. (2012). Effect of laser CO2 irradiation on various properties of polyester fabric: Focus on dyeing, Journal of Applied Polymer Science, 124(1), 342-348. DOI: https://doi.org/10.1002/app.34930

Nourbakhsh, S., Ebrahimi, I., Valipour, P. (2011). Laser treatment of the wool fabric for felting shrinkage control, Fibers and Polymers, 12(4), 521-527. DOI: https://doi.org/10.1007/s12221-011-0521-6

Morgan L., Tyrer, J. R., Kane, F. (19-23 October 2014). The effect of CO2 laser irradiation on surface and dyeing properties of wool for textile design, 33rd International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing DOI: https://doi.org/10.2351/1.5063061

Morgan L., Tyrer, J. R., Kane, F. Shen, J. (2015, June 10-12). Laser-Dyeing for Sustainable Textile Design. Paper presented at the 13th International Wool Research Conference (IWRC-13) and AATCC Sustainability Symposium, Zhejiang Sci-Tech University, Hangzhou, China.

Morgan, L. (2016). Laser textile design: the development of laser dyeing and laser moulding processes to support sustainable design and manufacture (PhD Thesis), The University of Loughborough, Leicestershire, UK.

Atav, R., Köksal Daban, S., Çetin, E., (2022) Investigation of the effect of laser technology on the colouring and patterning possibilities in polyacrylonitrile socks, Coloration Technology, 138(4), 368–377. DOI: https://doi.org/10.1111/cote.12596

Atav, R., Köksal Daban, S., & Çetin, E. (2023) Investigation of the clean patterning possibilities on cotton socks through laser technology. Coloration Technology, 139(5), 578-595 DOI: https://doi.org/10.1111/cote.12668

Atav, R., Çolakoğlu, Ö. (2024). Investigation of the effect of laser technology on the color of polyester fabrics, International Journal of Clothing Science and Technology, 36(3), 417-433 DOI: https://doi.org/10.1108/IJCST-06-2023-0089

Blackburn, R.S., Burkinshaw, S.M. (2002). A greener approach to cotton dyeings. Part 2: application of 1:2 metal complex acid dyes, Green Chemistry, 4(3), 261-265. DOI: https://doi.org/10.1039/b201893d

ISO 105-X12 standard, “Textiles tests for color fastness. Part X12: Color fastness to rubbing”, 1993.

ISO 105-E01 standard, “Textiles-Tests for color fastness, Part E01: Color fastness to water”, 2013.

ISO 105-E04 standard, “Textiles-Tests for color fastness, Part E04: Color fastness to perspiration”, 1994.

Most read articles by the same author(s)