Orclever Proceedings of Research and Development

The Role Of Air Flow Optimization For Battery Life And Performance In Cordless Stick Vacuum Cleaners

Onur Hamdi Uzun

Technocast Otomotiv San. ve Tic. A.Ş

https://orcid.org/0009-0001-4730-9166

İzen Elmaslı

Technocast Otomotiv San. ve Tic. A.Ş

https://orcid.org/0009-0001-3212-5647

Mohammadreza Masoumisoureh

Technocast Otomotiv San. ve Tic. A.Ş

https://orcid.org/0000-0002-3015-2764

Mahir Yaşar

Technocast Otomotiv San. ve Tic. A.Ş

https://orcid.org/0000-0001-9672-2080

Selcen Çalışkan

Technocast Otomotiv San. ve Tic. A.Ş

https://orcid.org/0000-0002-7710-2836

Gizem Büşra Gök

Technocast Otomotiv San. ve Tic. A.Ş

https://orcid.org/0000-0001-7573-8956

Hafız Alisoy

Namik Kemal University

https://orcid.org/0000-0003-4374-9559

DOI: https://doi.org/10.56038/oprd.v3i1.350

Keywords: Cordless stick vacuum cleaner, air path design, heating, performance

---

Abstract

As technology develops, so does the demand for products that make our lives easier. Cordless stick vacuum cleaners are one of these products and have become increasingly popular in recent years particularly for the convenience of being cordless. However, there are many factors affecting battery life and vacuum performance of cordless stick cleaners, the most important of these factors is the heating of the battery. One solution to this problem is a design that aims to reduce the battery temperature and increase the vacuum performance of the cleaner by directing some of the outlet air from the motor to the battery pack. Tests were carried out with the air flow path closed and the air flow path open. As a result of the tests, it was observed that the battery performance and usage performance increased by approximately 30% when the air flow path was open.

---

References

Q. Bi ve D. Shao, “Loss Analysis of High-Speed Permanent Magnet Motor for Cordless Vacuum Cleaner,” Journal of Physics: Conference Series, 2nd International Conference on Green Energy and Power Systems (ICGEPS 2023), Changsha, China, 2023, Volume 2488. doi:10.1088/1742-6596/2488/1/012021 DOI: https://doi.org/10.1088/1742-6596/2488/1/012021

K. Kirad ve M. Chaudhari, “Design of cell spacing in lithium-ion battery module for improvement in cooling performance of the battery thermal management system,” J. Power Sources. vol. 481, 229016, Jan. 2021. DOI: https://doi.org/10.1016/j.jpowsour.2020.229016

A. A. Pesaran, “Battery thermal models for hybrid vehicle simulations,” J. Power Sources, vol. 110, no. 2, pp. 377-382, Aug. 2002. DOI: https://doi.org/10.1016/S0378-7753(02)00200-8

Z. Rao ve S. Wang, “A review of power battery thermal energy management,” Renew. Sust. Energ. Rev., vol. 15, no. 9, pp. 4554-4571, Dec., 2011 DOI: https://doi.org/10.1016/j.rser.2011.07.096

S. Sahahid ve M. Agelin-Chaab, “Development and analysis of a technique to improve air-cooling and temperature uniformity in a battery pack for cylindrical batteries,” Therm. Sci. Eng. Prog., vol 5, pp. 351-363, Mar, 2018. DOI: https://doi.org/10.1016/j.tsep.2018.01.003

ASPİLSAN Enerji Sanayi ve Ticaret A.Ş. Pil ve Batarya Sistemleri, “INR18650A28 Datasheet”, [Çevrimiçi]. Mevcut: https://www.aspilsan.com/wp-content/uploads/2023/07/A28_Public_Datasheet_rev05.pdf . [Erişim: 22 Aralık 2023].