An interface design for comparison of energy consumption of penumatic and ball screw-driven linear actuators
Main Article Content
Abstract
Today, engineers use many computer programs and applications to model and analyze engineering problems. However, the demand for user-friendly interfaces and web-based applications is increasing daily to select the appropriate system components according to different working conditions and to evaluate the results comparatively. Also, most of these interfaces calculate the actuators' size and are mostly developed by foreign manufacturers. Nowadays, with the increase in energy costs, the demand for the use of energy-saving products is also increasing. Therefore, examining and comparing the energy consumption of the actuator elements used in the systems depending on the work done is necessary.
In this study, the authors discussed the issue of developing an interface that can define the appropriate size of actuators for the different operating conditions, such as different loads, slopes, friction, opposite load, and speed, and enable comparative energy consumption according to these elements for electro-pneumatic and servo motor driven ball screw shaft driven actuator types.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
References
Aliane, Nourdine. (2010). A Matlab/Simulink-Based Interactive Module for Servo Systems Learning. Education, IEEE Transactions on. 53. 265 - 271. 10.1109/TE.2009.2014468. DOI: https://doi.org/10.1109/TE.2009.2014468
Tao, Jinsong & Gan, Wangwei & Fang, Shuhan & Liu, Yamin & Zhang, Xiaoxing & Wen, Xishan. (2021). A MATLAB GUI teaching application for ferroresonance simulation. Computer Applications in Engineering Education. 29. 10.1002/cae.22421. DOI: https://doi.org/10.1002/cae.22421
Casini, Marco & Prattichizzo, Domenico & Vicino, Antonio. (2003). The automatic control telelab: A user-friendly interface for distance learning. Education, IEEE Transactions on. 6. 252 - 257. 10.1109/TE.2002.808224. DOI: https://doi.org/10.1109/TE.2002.808224
Sefkat, Gursel. (2009). Investigating static and dynamic characteristics of electromechanical actuators (EMA) with MATLAB GUIs. Computer Applications in Engineering Education. 18. 383 - 396. 10.1002/cae.20279. DOI: https://doi.org/10.1002/cae.20279
Khaisongkram, Wathanyoo & Banjerdpongchai, David. (2003). MATLAB-based GUIs for linear controller design via Convex Optimization. Computer Applications in Engineering Education. 11. 13 - 24. 10.1002/cae.10035. DOI: https://doi.org/10.1002/cae.10035
Erzan Topçu, E. & İnci, M. (2023). Dişli Kayış Tahrikli Elektromekanik ve Pnömatik Uzun Stroklu Eyleyicilerin Maliyet Analizi İncelemesi . Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi , 6 (1) , 161-180 . DOI: 10.47495/okufbed.1094876. DOI: https://doi.org/10.47495/okufbed.1094876
Zuowei Li, T. Izumi, and H. Zhou, "Optimal design of lead for minimizing energy dissipated in a mechatronic system with a ball screw-nut," 2009 International Conference on Mechatronics and Automation, Changchun, China, 2009, pp. 1985-1990, doi: 10.1109/ICMA.2009.5245969. DOI: https://doi.org/10.1109/ICMA.2009.5245969
Mohammad, Abdelkhalick & Uchiyama, Naoki & Sano, Shigenori. (2014). Reduction of Electrical Energy Consumed by Feed-Drive Systems Using Sliding-Mode Control With a Nonlinear Sliding Surface. Industrial Electronics, IEEE Transactions on. 61. 2875-2882. 10.1109/TIE.2013.2275975. DOI: https://doi.org/10.1109/TIE.2013.2275975
Caracciolo, R. & Richiedei, Dario. (2014). Optimal design of ball-screw driven servomechanisms through an integrated mechatronic approach. Mechatronics. 24. 10.1016/j.mechatronics.2014.01.004. DOI: https://doi.org/10.1016/j.mechatronics.2014.01.004
Liu, Wei & Li, Li & Cai, Wei & Li, Congbo & Li, Lingling & Chen, Xingzheng & Sutherland, John. (2020). Dynamic characteristics and energy consumption modelling of machine tools based on bond graph theory. Energy. 212. 118767. 10.1016/j.energy.2020.118767. DOI: https://doi.org/10.1016/j.energy.2020.118767
Rigacci, Massimiliano & Sato, Ryuta & Shirase, Keiichi. (2020). Experimental evaluation of mechanical and electrical power consumption of feed drive systems driven by a ball-screw. Precision Engineering. 64. 10.1016/j.precisioneng.2020.04.016. DOI: https://doi.org/10.1016/j.precisioneng.2020.04.016
Harris, Paul & Nolan, Sean & O’Donnell, G.E.. (2014). Energy Optimisation of Pneumatic Actuator Systems in Manufacturing. Journal of Cleaner Production. 72. 10.1016/j.jclepro.2014.03.011. DOI: https://doi.org/10.1016/j.jclepro.2014.03.011
Blagojevic, Vladislav & Šešlija, Dragan & Dudić, Slobodan & Randjelovic, Sasa. (2020). Energy Efficiency of Pneumatic Cylinder Control with Different Levels of Compressed Air Pressure and Clamping Cartridge. Energies. 13. 3711. 10.3390/en13143711. DOI: https://doi.org/10.3390/en13143711
Raisch, Adrian & Sawodny, Oliver. (2019). Modeling and Analysis of Pneumatic Cushioning Systems Under Energy-Saving Measures. IEEE Transactions on Automation Science and Engineering. PP. 1-11. 10.1109/TASE.2019.2955806.
Enerji Piyasaları Düzenleme Kurumu (2023, Eylül 30). Elektrik Faturalarına Esas Tarife Tabloları. https://www.epdk.gov.tr/Detay/Icerik/3-1327/elektrik-faturalarina-esas-tarife-tablolari
Hirzel S., Schroeter M., Hettesheimer T. Electric or pneumatic? comparing electric and pneumatic linear drives with regard to energy efficiency and costs, ECEEE Industrial Summer Study Proceedings 2014; 475-485.